` dicon?s pm mems attenuator is based on a micro-electro- mechanical system (mems) chip. the mems chip consists of an electrically movable mirror on a silicon support. a voltage applied to the mems chip causes the mirror to rotate, which changes the coupling of light between the input and output fibers of the mems attenuator. features small attenuator package high extinction ratio qualified to gr-1221 available in opaque or transparent versions available in both cylindrical and 14-pin dip packages applications mems attenuators are used for distributed power equalization within oadms, mux/dmuxes, band equalizers, channel equalizers, optical cross-connects, line cards and transponders. polarization maintaining attenuators can also be used for power adjustment in polarization sensitive devices such as modulators. u.s. patented. specifications subject to change. copyright ?2004 dicon fiberoptics, inc. all rights reserved. pm mems attenuator attenuators cylindrical package
attenuators excess loss 0.8 db max. back-reflection -50 db max. wear-out 1 x 10 cycles min. response time 2 ms max. repeatability 0.1 db max. fiber type panda 400 or equivalent optical power 500 mw max. operating temperature -5 0 c to +70 0 c storage temperature -40 0 c to +85 0 c 1. all specifications referenced without connectors. 3. maximum change of each 2 nm segment within the operating range. 18 db min. extinction ratio 9 2. at room temperature. attenuation slope 20 db/v max. flatness broad band application narrow band application 3 15 to 20 db 0.7 db max. 0 to 15 db 0.4 db max. 0 to 20 db 0.2 db max. dicon fiberoptics, inc. 1689 regatta blvd. richmond, ca 94804 tel. (510)620-5000 fax. (510)620-4100 www.diconfiber. com pm mems attenuator attenuators 0121b optical specifications 1,2 housing dimensions ordering information 1 3 . 5 ? 5 . 56 3 . 00 27. 5 mem s -v o a 2 ( cntl ) 3 ( gnd ) 1. 0 ? 2. 5 ? 5 . 56 dc drive voltage 20 uwatt max. actuation type non-latching voltage damage threshold resistance power consumption 2 m ? min. 10 vdc max. 0 - 5 vdc (6.5 v for opaque) electrical specifications ? 5 . 50 1 2.7 0 2. 54 ? . 4 5 4. 8 4 7. 62 cylindrical package 14-pin dip package control voltage (v) attenuation (db) transparent 01 2 34567 0 10 20 30 40 50 control voltage (v) attenuation (db) opaque 01 2 34567 0 10 20 30 40 50 optical performance units: mm 1 g n d 2 c nt l 3 n c 4 n c 5 n c 6 n c 7 n c 8 nc 9 nc 10 nc 11 case gnd 12 nc 13 nc 14 nc pin assi g nmen t 1 2 3 4 5 6 7 8 9 10 11 12 1 3 14 to p vie w
|